Theben theRonda S360-101 UP presence sensor white

For flush-mounted ceiling installation: passive infrared presence detector theRonda S360-101 UP

TheRonda S360-100 passive infrared presence detector is ideal for automatic lighting control depending on presence and brightness. It is installed in the ceiling by means of a recessed box (Ø 55 mm, NIS, PMI) and has numerous useful functions. With a detection angle of 360° and a radius of up to 9 metres, an area of approx. 64 m² is covered. If necessary, the detection area can be reduced using clips included in the delivery. The predefined values and settings can only be changed using a suitable remote control. These are available via the accessories - theSenda S user remote control, theSenda P service remote control, theSenda B app remote control.

A connection option for pushbuttons or switches for manual switching with automatic recognition "pushbutton/switch" is available.

- Mounting height: 2 to 4 m

- Power consumption: ~ 0.1 W

- Brightness setting range: 30 to 3,000 lux, permanently on

- Light run-on time: pulse (0.5 s), 10 s - 60 min

- equipped with pulse function for staircase light timer

- Channel A light: relay, 230 V

- fully automatic operation

- Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs

- Brightness switching value adjustable, teach-in function

- Short-term presence adjustable

- Presence switch-on delay: 0 s to 10 min

- Presence follow-up time: 10 s to 120 min

- Test operation possible to check function and detection range

- Incandescent/halogen lamp load: 2,300 W

- Fluorescent, compact/fluorescent lamps: 1,150 VA (cos φ = 0.5)

- Inrush current: max. 800 A/200µs

- LED lamp < 2 W: 60 W

- LED lamp > 2 W: 600 W

- Connection by means of screw terminals

- max. cable cross-section: 2 x 2.5 mm²

- Ambient temperature: -'15 °C to + 50 °C

- Protection class: IP54 (when installed)