OPUS EasyStart light, starter pack

OPUS EasyStart light - ideal starter set for smart light control The OPUS EasyStart light starter set is a pre-configured and ready-to-install solution that can control lights in the room in the simplest possible way. The flush-mounted light switch OPUS Bridge 1 channel is installed in place of the existing light switch. Thanks to its design, it fits into any standard flush-mounted box and can be installed by a qualified electrician without a lot of dust, dirt or renovation work. A matching cable-free and battery-free wall transmitter is included in the StarterSet. This can be positioned freely, for example on the bed, on the wall or on a piece of furniture, and can be either screwed in or attached using self-adhesive film. The matching frame and rocker in white are included for both the Bridge and wall transmitter. Once installation is complete, the lighting in the room can be conveniently switched using the light switch on the wall or the additional transmitter. Perfect in the bedroom, for example, where the light can be switched on or off quickly and easily without having to get out of bed. In conjunction with an OPUS Smart Home Gateway, both switches can be assigned scenes or automations. These are conveniently called up at the touch of a button and can not only switch lights on and off, but also control other suitable OPUS components - EnOcean radio standard - Wireless data specification: IEEE 802.15.4 - Frequency: 868.3 MHz - Range 30m indoors, 200m outdoors - Can be controlled with the AppleHomekit and other systems in conjunction with the OPUS Smart Home Gateway - OPUS Bridge 1-channel: Flush-mounted installation height 25 mm, connection/operating voltage 230 V 50/60 Hz